semplr.

Exams · Certifications · Licensing

EPA Section 608 — Type II

Safety: practice questions

Our EPA 608 Type II bank has 8 questions on this topic. Here are 5 of them with answers; the full mock exam draws from every topic, like the real one.

Start the free mock exam

Question 1

What is the danger of overfilling a recovery cylinder?

  1. Nothing
  2. Hydrostatic pressure from expanding liquid can rupture it
  3. The refrigerant changes type
  4. The cylinder becomes too light to weigh accurately on a standard refrigerant scale
Show the answer

B. Hydrostatic pressure from expanding liquid can rupture it — Fill to no more than 80% by volume.

Question 2

What happens if an R-22 cylinder is heated with an open flame?

  1. Nothing
  2. The pressure decreases
  3. It can overpressurize and rupture, and the refrigerant can form toxic gases
  4. The refrigerant turns into water vapor and harmlessly escapes through the relief valve
Show the answer

C. It can overpressurize and rupture, and the refrigerant can form toxic gases — Never heat cylinders above 125 °F or with a torch.

Question 3

Why must a technician never cut into a system that still contains refrigerant?

  1. It speeds recovery
  2. It releases refrigerant and can cause injury
  3. It is required as the first step of any leak test on the system
  4. It removes moisture
Show the answer

B. It releases refrigerant and can cause injury — Recover first.

Question 4

Why must recovery equipment rated for R-410A be used when recovering R-410A?

  1. R-410A is a low-pressure refrigerant, so standard equipment would run too slowly
  2. R-410A is flammable
  3. R-410A operates at higher pressures than older refrigerants
  4. R-410A is a solid
Show the answer

C. R-410A operates at higher pressures than older refrigerants — Check that hoses, gauges and cylinders are rated for the refrigerant.

Question 5

What can happen if liquid refrigerant enters the compressor (slugging)?

  1. The refrigerant becomes cleaner
  2. Valves and other compressor parts can be damaged
  3. Nothing
  4. The compressor runs more efficiently and draws less current
Show the answer

B. Valves and other compressor parts can be damaged — Liquid is not compressible.

More EPA 608 Type II topics