semplr.

Exams · Certifications · Licensing

EPA Lead Renovation, Repair and Painting (RRP) Certified Renovator course test

Lead-safe work practices: practice questions

Our EPA Lead RRP Renovator bank has 22 questions on this topic. Here are 5 of them with answers; the full mock exam draws from every topic, like the real one.

Start the free mock exam

Question 1

When using a shrouded sander with HEPA attachment, what must not happen?

  1. Any noise louder than 70 decibels
  2. Visible dust escaping the shroud
  3. Use for more than one hour per day
  4. Use on exterior walls and siding
Show the answer

B. Visible dust escaping the shroud — Machines must be operated so that no visible dust or release of air occurs outside the shroud or containment system.

Question 2

Containment must be installed so that it:

  1. Covers all exterior doors with sealed plastic
  2. Seals every window in the whole building
  3. Does not block emergency exit for occupants and workers
  4. Blocks firefighter access to the work area
Show the answer

C. Does not block emergency exit for occupants and workers — Section 745.85(a)(2) requires containment that does not interfere with occupant and worker egress in an emergency.

Question 3

Which practice is prohibited on painted surfaces during a renovation?

  1. Misting before scraping
  2. Wet scraping
  3. Open-flame burning or torching
  4. Using a heat gun at 900°F
Show the answer

C. Open-flame burning or torching — Section 745.85(a)(3)(i) prohibits open-flame burning or torching of painted surfaces.

Question 4

Who should be kept out of the work area during a renovation?

  1. Only household pets such as cats and dogs
  2. Only pregnant women and nursing mothers
  3. Occupants and anyone not involved in the work
  4. Only children under 6 years of age
Show the answer

C. Occupants and anyone not involved in the work — Section 745.85(a)(1) requires signs warning occupants and others not involved to stay outside the work area.

Question 5

Power sanding of painted surfaces is allowed only when the sander:

  1. Runs at low speed below 1,000 rpm
  2. Has a shroud and a HEPA vacuum attachment
  3. Is battery powered rather than corded
  4. Is used outdoors with the wind behind you
Show the answer

B. Has a shroud and a HEPA vacuum attachment — Section 745.85(a)(3)(ii) allows high-speed paint removal machines only with shrouds or containment and a HEPA vacuum attachment at the point of generation.

More EPA Lead RRP Renovator topics